Skip to main content

v1.0

Major VersionM

by StJohn Vuetilovoni

Introduction

The activated carbon and purafil capsules need to be replaced yearly.

A zero air scrubber replacement kit can be purchased from Aeroqual. It comes with all the relevant fittings so it can be installed easily into the AirCal 1000.

  1. Unscrew the 2 top screws at the back of the AirCal 1000. The top plate should slide out easily.
    • Unscrew the 2 top screws at the back of the AirCal 1000. The top plate should slide out easily.

  2. Disconnect the tube between the purafil capsule and the pump.
    • Disconnect the tube between the purafil capsule and the pump.

    • Unscrew the luer fitting connecting the purafil and activated carbon capsules.

    • Unscrew the luer fitting connecting the activated carbon capsule and the heated carulite capsule (not visible).

    • Unclip the purafil and activated carbon capsules and remove.

  3. Clip the new capsules into place.
    • Clip the new capsules into place.

    • Reconnect the tube between the purafil capsule and pump.

    • Screw the luer fittings to connect the capsules.

Conclusion

For further support, contact Technical Support.

Tanya Taylor

Member since: 02/25/2020

141 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 87