Under the Setting’s heading and Installing a Sensor head there is mention of having to burn off contaminants on a new ozone head for 24 hours. In order to do this for a full 24 hours do you turn on the machine with the power cord attached? Plugged in to me seems the only way this is going to stay powered on. Thanks.
Under the Setting’s heading and Installing a Sensor head there is mention of having to burn off contaminants on a new ozone head for 24 hours. In order to do this for a full 24 hours do you turn on the machine with the power cord attached? Plugged in to me seems the only way this is going to stay powered on. Thanks.
Tim Wiley, ACI Safety Director
It would be nice to talk a little about wire management. The cell information I hope goes to the inside of the monitor.