Your Series 500 monitor can log up to 8,188 data points. The length of time data can be logged depends on the logging frequency and the number of parameters recorded.
For example:
- If you log every minute for 1 parameter (i.e one gas), you can log for 8,188 minutes.
- If you log every minute for 3 parameters, (i.e. one gas, temperature and humidity), you can log for 2,729 minutes.
- If you log every 5 minutes for 1 parameter, you can log for 40,940 minutes.
- If you log every 5 minutes for 3 parameters, you can log for 13,646 minutes.
Once capacity is reached, new data starts to overwrite the oldest logged data.
Less frequent logging
If you set a logging frequency greater than 1 minute, the logged data is a single sample taken at the point it’s logged. No averaging is performed.
| Logging frequency set to 1 minute | Logging frequency set to 5 minutes | ||
|---|---|---|---|
| Time | Logged reading | Time | Logged reading |
| 11:00 | 0.01ppm | 11:00 | 0.01ppm |
| 11:01 | 0.11ppm | 11:01 | - |
| 11:02 | 0.15ppm | 11:02 | – |
| 11:03 | 0.09ppm | 11:03 | – |
| 11:04 | 0.05ppm | 11:04 | – |
| 11:05 | 0.02ppm | 11:05 | 0.02ppm |