v1.11

Minor Versionm

by StJohn Vuetilovoni

Connect battery (rotary switch)

Written By: Tanya Taylor (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

2

Time Required

00:15:00 - 00:30:00

Sections

1

Flags

0

  1. Your monitor might be fitted with a rotary switch that allows you to switch from mains power (AC) to battery power (12 VDC) without touching the wiring. These monitors also have a DC-DC converter (big blue box) and a battery voltage monitor which allows you to set an alert if the voltage drops.

    • Your monitor might be fitted with a rotary switch that allows you to switch from mains power (AC) to battery power (12 VDC) without touching the wiring.

    • These monitors also have a DC-DC converter (big blue box) and a battery voltage monitor which allows you to set an alert if the voltage drops.

  2. To connect a battery so you can easily go from mains power to battery power: Remove the cover from the power and data interface (PDI). Wire your battery to the green input terminals on the PDI board.

    • To connect a battery so you can easily go from mains power to battery power:

    • Remove the cover from the power and data interface (PDI).

    • Wire your battery to the green input terminals on the PDI board.

    • When using battery power, the PDI lights should come on when the rotary switch is set to BATT.

Conclusion

For further support, contact Technical Support.

One other person completed this guide.

Author

with 1 other contributor

Tanya Taylor

Member since: 2/25/20

137 Guides authored