Introduction
Use this guide to manually carry out a zero check using the AirCal 1000 PC software.
Tools
No tools specified.
-
-
Select the Zero Check option in the Functions panel.
-
-
-
To start the recording of data every minute, select Start Reading in the Functions panel.
-
Wait 15 minutes for the sample gas to stabilize.
-
There may be some fluctuation in the MFM measurement (±5ml/min).
-
To stop data recording, select Stop Reading in the Functions panel. The data can then be cleared or exported to spreadsheet.
-
To stop the zero check completely, select Stop Check in the Functions panel.
-
Almost done!
For further support, contact Technical Support.
Conclusion
For further support, contact Technical Support.
