Skip to main content

v1.0

Major VersionM

by StJohn Vuetilovoni

Introduction

Use this guide to manually carry out a zero check using the AirCal 1000 PC software.

Tools

No tools specified.

Parts

  1. Select the Zero Check option in the Functions panel.
    • Select the Zero Check option in the Functions panel.

  2. To start the recording of data every minute, select Start Reading in the Functions panel. Wait 15 minutes for the sample gas to stabilize.
    • To start the recording of data every minute, select Start Reading in the Functions panel.

    • Wait 15 minutes for the sample gas to stabilize.

    • There may be some fluctuation in the MFM measurement (±5ml/min).

    • To stop data recording, select Stop Reading in the Functions panel. The data can then be cleared or exported to spreadsheet.

    • To stop the zero check completely, select Stop Check in the Functions panel.

Conclusion

For further support, contact Technical Support.

Tanya Taylor

Member since: 02/25/2020

136 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 20