Skip to main content

v0.12

Minor Versionm

by StJohn Vuetilovoni

Introduction

When you apply mains power and turn the monitor on using the rotary switch or fuse, the pump/s start and the ePC boots up with a series of beeps. The status LED lights on the modules, embedded PC and modem (if fitted) turn green.

  1. If you bought your monitor after October 2019, you can easily turn it on and off using a rotary switch.
    • If you bought your monitor after October 2019, you can easily turn it on and off using a rotary switch.

    • The rotary switch is found in the bottom right hand corner of the enclosure.

    • You can use the rotary switch to turn the monitor on by AC mains supply or by a DC source such as battery solar.

  2. All monitors, whether bought before or after October 2019, can be turned on and off using the fuse switch. Turn the monitor on by pushing the fuse into the fuse holder.
    • All monitors, whether bought before or after October 2019, can be turned on and off using the fuse switch.

    • Turn the monitor on by pushing the fuse into the fuse holder.

    • Turn the monitor off by pulling out the 12V DC fuse from the fuse holder.

Conclusion

For further support, contact Technical Support.

Tanya Taylor

Member since: 02/25/2020

141 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 229