v0.10

Minor Versionm

by StJohn Vuetilovoni

Power on and off

Written By: Tanya Taylor (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Very easy

Steps

2

Time Required

00:05:00

Sections

1

Flags

0

Tools

Parts

No parts specified.

  1. Turn the monitor on by pushing the 12V DC fuse into the fuse holder.

    • Turn the monitor on by pushing the 12V DC fuse into the fuse holder.

    • The pump/s starts and the ePC boots up with a series of beeps. The status LED lights on the modules, embedded PC and modem (if fitted) turn green.

  2. Turn the monitor off by pushing the fuse into the fuse holder.

    • Turn the monitor off by pushing the fuse into the fuse holder.

    • When the fuse is out, the internal fan continues to circulate air inside the box because it is powered by a different power supply.

Conclusion

For further support, contact Technical Support.

One other person completed this guide.

Author

with 1 other contributor

Tanya Taylor

Member since: 02/25/2020

141 Guides authored