Introduction
The Ranger date/time is automatically synchronized to a Global Time Server when connected to the internet via WiFi.
-
-
The Ranger automatically synchonizes its date/time to a Global Time server when connected to the internet via WiFi.
-
If the Ranger date/time is incorrect because it is being used in a different time zone then correct this by setting the correct time zone (go to the Settings guide)
-
If the Ranger date/time is incorrect because it hasnt been connected to the internet for a long time then set the date/time by connecting it to the internet via WiFi (see Connect Ranger to WiFi guide).
-
Once the Ranger has successfully connected to a WiFi network with internet access, turn it off and then back on. Wait 30s and you will see the date/time change to the correct values on the reading screen.
-
For further support, contact Aeroqual Support.
For further support, contact Aeroqual Support.
