Guides
Site Calibration
Information on site calibration of an AQY R.
Power on and warm up sensor head
Use this guide to power up your monitor and...
Connect sensor head
You can only connect one gas or particulate...
Install and start monitor
The S900 indoor monitor is lightweight,...
Wire for 4-20mA output
You can connect your S900 to a PLC or current...
Wire to external device
You can use your S900 as a relay controller to...
Perform span calibration
If you have a Series 500 or Series 300 handheld...
Perform zero calibration
If you have a Series 500 or Series 300 handheld...
Replace sensor board - DISCONTINUED
The SM70 is a low-maintenance monitor with no u...