Skip to main content

v0.11

Minor Versionm

by Tanya Taylor

Tools

Parts

No parts specified.

  1. Attach the inlet using a ¼ inch Swagelok compression fitting.
    • Attach the inlet using a ¼ inch Swagelok compression fitting.

  2. Perform a flow check to make sure the inlet is fitted correctly and the sample pump is working properly.
    • Perform a flow check to make sure the inlet is fitted correctly and the sample pump is working properly.

  3. Fit the supplied Kynar fitting to the Swagelok nut at the end of the sample cane. This fitting contains the mesh filter.
    • Fit the supplied Kynar fitting to the Swagelok nut at the end of the sample cane. This fitting contains the mesh filter.

Conclusion

For further support, contact Technical Support.

One other person completed this guide.

Tanya Taylor

Member since: 02/25/2020

135 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 123