Skip to main content

v1.0

Major VersionM

by StJohn Vuetilovoni

Introduction

Use this procedure to make sure the internal temperature is operating as expected.

An internal temperature of 30oC is suitable for most environments. For AQM 65s installed in extreme cold or extreme heat, the set point may be different to reduce the power demand placed upon the thermal management system.

  1. From the Aeroqual Connect or Aeroqual Cloud home screen, click Manage Data.
    • From the Aeroqual Connect or Aeroqual Cloud home screen, click Manage Data.

  2. Select Charts from the side menu  and view  the internal temperature in the ITEMP chart. If you're unsure what the internal temperature  is set to, enter the Diagnostics and Advanced app and  check the ITEMP / H0 parameter in Module Settings.
    • Select Charts from the side menu and view the internal temperature in the ITEMP chart.

    • If you're unsure what the internal temperature is set to, enter the Diagnostics and Advanced app and check the ITEMP / H0 parameter in Module Settings.

Conclusion

For further support, contact Technical Support.

Tanya Taylor

Member since: 02/25/2020

136 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 31