/
EN
/

Site Navigation

Your Account

Choose Language

v1.0

Major VersionM

by StJohn Vuetilovoni

Connect calibrator to computer

Written By: Tanya Taylor (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

3

Time Required

00:10:00

Sections

1

Flags

0

Introduction

This user guide assumes you have already installed the AirCal 1000’s computer software.

Note: You need to supply your own RS232 serial port to USB converter.

Tools

No tools specified.

Parts

  1. Connect a USB to RS232 converter between the RS232 serial port on your AirCal 1000 and the USB port on your computer.

    • Connect a USB to RS232 converter between the RS232 serial port on your AirCal 1000 and the USB port on your computer.

    • You may need to install the convertor drivers.

  3. Launch the AirCal 1000 computer software.

    • Launch the AirCal 1000 computer software.

    • Select the Communication Port option in the Functions panel.

    • Choose the correct com port on your computer.

    • This will be created when the serial port convertor is plugged in. You may need to install the convertor drivers.

    • Select Test Connection to check the AirCal 1000 is successfully connected.

  4. This step only needs to be done the first time the instrument is set up.

    • This step only needs to be done the first time the instrument is set up.

    • Select Update Real Time Clock to synchronize the AirCal 1000 clock with the computer date/time.

    • Once the connection is created and the date/time is updated, the software is ready to use.

Conclusion

For further support, contact Technical Support.

Author

with 1 other contributor

Tanya Taylor

Member since: 02/25/2020

136 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 21