Skip to main content

v1.0

Major VersionM

by StJohn Vuetilovoni

Introduction

Use this guide to manually carry out a span check using the buttons on the front panel of the AirCal 1000.

Tools

No tools specified.

  1. Use the UP and DOWN buttons on the front of the AirCal 1000 to select >MENU on the home screen. Press the ENTER button. Use the UP and DOWN buttons to select Manual from the main menu.
    • Use the UP and DOWN buttons on the front of the AirCal 1000 to select >MENU on the home screen.

    • Press the ENTER button.

    • Use the UP and DOWN buttons to select Manual from the main menu.

    • Press the ENTER button.

  2. Use the UP, DOWN and ENTER buttons to set the port to 1 or 2.
    • Use the UP, DOWN and ENTER buttons to set the port to 1 or 2.

    • Calculate the dilution ratio.

    • Use the UP, DOWN and ENTER buttons to set the dilution ratio based on your calculation.

    • Use the DOWN button to select Start and press the ENTER button.

Conclusion

For further support, contact Technical Support.

Tanya Taylor

Member since: 02/25/2020

141 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 72