Standby and power off

Written By: StJohn Vuetilovoni (and one other contributor)

Difficulty

Very easy

Steps

Time Required

00:10:00

Step 1 Enter standby mode

Standby mode conserves power between operations but keeps the sensor warm, ready to measure the gas concentration with only a short warm-up.
With the monitor on, press the POWER button once. This stops the operation of the monitor and changes the display to shows the sensor head type and a standby icon.
When using a CO2 sensor head in standby mode, the sensor runs at full power and the fan stays on.
To return the monitor to operational mode, press the POWER button once.

To turn the monitor off, press and hold the POWER button for 2 seconds until the monitor beeps. The display turns blank and the monitor stops operating.