Guides
Connect third-party sensor using AUX module
All you need to know to attach third-party sensors such as weather stations...
Change Profiler Settings
How to change the profiler settings to the correct configuration.
Hot-swap How-to: MetOne Module
This guide shows you how to Hotswap a MetOne 82850 Particulate Matter or...
Profiler Configuration Troubleshooting
How to troubleshoot communications with the profiler if the standard...
4. Perform span calibration (all modules except CO2 and O3)
Span calibration should only be performed on mo...
Change internal temperature (AQM65 Only)
An internal temperature of 30^(o)C is suitable...
Check internal temperature (AQM65 Only)
Use this procedure to make sure the internal...
How-to: Update BIOS on ARK-1124C
This guide is to update the BIOS on an ARK-1124C (S1A2 and S1A1E)
Set up calibration accessory (AS R42)
Aeroqual’s calibration accessory (AS R42)...
Page 1