Skip to main content

v1.15

Minor Versionm

by Tanya Taylor

Introduction

Your Series 500 monitor can log up to 8,188 data points. The length of time data can be logged depends on the logging frequency and the number of parameters recorded.

To learn more about the role of logging frequency, see here.

  1. Press the ENTER button. Select LOGGING SETUP from the main menu.
    • Press the ENTER button.

    • Select LOGGING SETUP from the main menu.

  2. When LOG FREQ appears on the display, use the UP/DOWN buttons to select the required logging frequency in 1 minute intervals.
    • When LOG FREQ appears on the display, use the UP/DOWN buttons to select the required logging frequency in 1 minute intervals.

    • Press ENTER to confirm the selection and return to the SETUP menu.

Conclusion

For further support, contact Technical Support.

One other person completed this guide.

StJohn Vuetilovoni

Member since: 02/24/2020

47 Guides authored

Team

Aeroqual Staff Member of Aeroqual Staff

Community

1 Member

47 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 7

All Time: 46