Skip to main content

v1.8

Minor Versionm

by Tanya Taylor

Introduction

While logging directly to a PC, you can view data in two different graph formats.

Note: It assumes you have already installed the monitor’s configuration software, downloaded the cable driver and connected your monitor to a PC.

  1. Launch the Aeroqual S500 software and select Data > Real Time Graph View or Data > Graph > Logged Data from the menu bar. Each parameter shows in its own tab. To configure a graph, select Data > Graph > Default Style, or right-click on the graph and select Graph Style.
    • Launch the Aeroqual S500 software and select Data > Real Time Graph View or Data > Graph > Logged Data from the menu bar. Each parameter shows in its own tab.

    • To configure a graph, select Data > Graph > Default Style, or right-click on the graph and select Graph Style.

    • To zoom in, click and drag over a specific area.

    • To save or print a graph, right click on the graph and select the relevant option. Graphs are saved as a .jpg files.

    • To reset a graph, right click and select Reset to Default.

    • In Logged Data Graph View, use the date, time, monitor ID, location ID and sensor filters to narrow the data and click Apply.

Conclusion

For further support, contact Technical Support.

StJohn Vuetilovoni

Member since: 02/24/2020

47 Guides authored

Team

Aeroqual Staff Member of Aeroqual Staff

Community

1 Member

47 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 12

All Time: 35