Introduction
While logging directly to a PC, you can view data in two different table formats.
Note: It assumes you have already installed the monitor’s configuration software, downloaded the cable driver and connected your monitor to a PC.
-
-
Launch the Aeroqual S500 software and select Data > Real Time Table View or Data > Logged Data Table View from the menu bar.
-
In Logged Data Table View, use the date, time, monitor ID, location ID and sensor filters to narrow the data and click Apply.
-
The Logged Data Table View shows up to 7 days of data on each page. Click >> at the bottom of the table to view the previous or next 7 days of data within the filtered data set.
-
Only data from one monitor can be viewed in a table at a time.
-
For further support, contact Technical Support.
For further support, contact Technical Support.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
