v1.8

Minor Versionm

by StJohn Vuetilovoni

Select output sensor

Written By: StJohn Vuetilovoni (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 3

Difficulty

Very easy

Steps

2

Time Required

00:10:00

Sections

1

Flags

0

Introduction

The output sensor selection determines which sensor parameter the alarm, control points and buzzer refer to.

  1. Press the ENTER button and select MONITOR SETUP from the main menu. Select OUTPUT SENSOR from the secondary menu. Select OUTPUT SENSOR from the secondary menu.

    • Press the ENTER button and select MONITOR SETUP from the main menu.

    • Select OUTPUT SENSOR from the secondary menu.

  2. Use the UP/DOWN buttons to select the required parameter.

    • Use the UP/DOWN buttons to select the required parameter.

    • Press ENTER to confirm the selection and return to the setup menu.

    • The 0-5V analog signal also operates on the selected sensor and measurement range.

Conclusion

For further support, contact Technical Support.

3 other people completed this guide.

Author

with 1 other contributor

StJohn Vuetilovoni

Member since: 02/24/2020

57 Guides authored

Team

Aeroqual Staff Member of Aeroqual Staff

2 Members

9 Guides authored